TRENDS IN THE SCIENTIFIC LITERATURE ON THE LEAGILE SUPPLY CHAIN: BIBLIOMETRIC AND CITATION CONTEXT ANALYSES

Leagile is a hybrid of conventional lean and agile approaches intended to eliminate specific constraints and capacity limitations and enable agility in highly competitive business environments. Interest in incorporating lean and agile into the supply chain has grown in recent years, as shown by the growing number of scientific publications on this topic. This topic has garnered significant interest across a wide range of academic disciplines; however, a comprehensive study of the literature in this field has not yet been conducted. Therefore, the present study aims to provide a state-of-the-art summary of leagile supply chain issues that concern researchers. To do so, we use a bibliometric method, combined with citation context analysis, to evaluate data extracted from Scopus peer-reviewed articles published between 1999 and March 2023. Data analytic techniques, including citation analysis, co-citation analysis, and co-word (co-occurrence) analysis, are used. Using rigorous bibliometric and visualization tools, the results show the current status of the research problem, its impact, and suggestions for future work to address research gaps, such as a problem in an area of research that has been answered incompletely or insufficiently. The findings suggest that researchers in unexplored research areas in the ASEAN region include green supply chain strategies, supply chain risk management influenced by lean and agile strategies, and comparative analyses among ASEAN countries. These areas offer promising avenues for future research, contributing to regional competitiveness and performance enhancement

Performance Evaluation of Pre-foamed Ultra-lightweight Composites Incorporating Various Proportions of Slag

This research examines the feasibility of using a mixture of cement, fly ash, ground granulated blast-furnace slag, and river sand to manufacture pre-foamed ultra-lightweight composite (PULC). Four PULC specimens were prepared with the substitution of cement by slag at 0, 10, 20, and 30 % by weight. The engineering properties of PULC samples were evaluated through the tests of compressive strength, dry density, water absorption, drying shrinkage, and thermal conductivity. Besides, numerical simulation of heat transfer through the PULC brick wall and the microstructure observation were performed. The performance of PULC mixtures incorporating slag showed higher effectiveness than merely used cement. The substitution of 20 % cement by slag resulted in the highest compressive strength as well as the lowest value of water absorption of the PULC samples. Also, the efficiency of the thermal conductivity was in inverse proportion with the density of PULC specimens and it was right for water absorption and drying shrinkage. Moreover, numerical simulations showed that the temperature distribution values in the wall made by PULC material were smaller than in the wall made by the normal clay brick in the same position. Besides, the microstructure analysis revealed that the existence of slag generated a more dense structure of PULC samples with the addition of calcium-silicate-hydrate (C-S-H) gel, especially for a mix containing 20 % slag. Thus, the results of this study further demonstrated that a 20 % slag was the optimal content for the good engineering properties of the PULC samples

Single phase second order sliding mode controller for complex interconnected systems with extended disturbances and unknown time-varying delays

Novel results on complex interconnected time-delay systems with single phase second order sliding mode control is investigated. First, a reaching phase in traditional sliding mode control (TSMC) is removed by using a novel single phase switching manifold function. Next, a novel reduced order sliding mode observer (ROSMO) with lower dimension is suggested to estimate the unmeasurable variables of the plant. Then, a new single phase second order sliding mode controller (SPSOSMC) is established based on ROSMO tool to drive the state variables into the specified switching manifold from beginning of the motion and reduce the chattering in control input. Then, a stability condition is suggested based on the well-known linear matrix inequality (LMI) method to ensure the asymptotical stability of the whole plant. Finally, an illustrated example is simulated to validate the feasible application of the suggested technique

The Relationship between Online Learning and Student Satisfaction with Training Quality in Private Universities during the COVID-19 Pandemic

This study aims to explore the relationship between the influential factors of online learning and the satisfaction of economics and business majors with the quality of their training in the context of the Covid-19 pandemic. A total of 900 students in private universities completed a questionnaire. The principal findings of this research are that the students are satisfied with their online learning and that learning conferencing software is the most important driving factor leading to the students’ satisfaction when compared with learning conditions and learning devices. Another interesting finding is that the experience of using learning conferencing software results in a slight difference in the students’ perceived level of satisfaction, adding that users with more than two years’ experience are more satisfied with their training quality than users with less than one year’s experience. However, the results also show that students want to switch to offline learning when the pandemic is over. This study should, therefore, be of value to higher education authorities wishing to understand their students’ perceptions of online learning. In addition, results from the study suggest more managerial approaches as well as improve the online teaching quality during the pandemic

Discovering Water Quality Changes and Patterns of the Endangered Thi Vai Estuary in Southern Vietnam through Trend and Multivariate Analysis

Temporal and spatial water quality data are essential to evaluate human health risks. Understanding the interlinking variations between water quality and socio-economic development is the key for integrated pollution management. In this study, we applied several multivariate approaches, including trend analysis, cluster analysis, and principal component analysis, to a 15-year dataset of water quality monitoring (1999 to 2013) in the Thi Vai estuary, Southern Vietnam. We discovered a rapid improvement for most of the considered water quality parameters (e.g., DO, NH4, and BOD) by step trend analysis, after the pollution abatement in 2008. Nevertheless, the nitrate concentration increased significantly at the upper and middle parts and decreased at the lower part of the estuary. Principal component (PC) analysis indicates that nowadays the water quality of the Thi Vai is influenced by point and diffuse pollution. The first PC represents soil erosion and stormwater loads in the catchment (TSS, PO4, and Fetotal); the second PC (DO, NO2, and NO3) determines the influence of DO on nitrification and denitrification; and the third PC (pH and NH4) determines point source pollution and dilution by seawater. Therefore, this study demonstrated the need for stricter pollution abatement strategies to restore and to manage the water quality of the Thi Vai Estuary

Validation of Mesocyclops (Copepoda) and community participation as an effective combination for Dengue control in Northern Vietnam

The “Programme Meso-Vietnam” was implemented in Vietnam from October 2007 to December 2010 to reduce dengue and dengue hemorrhagic fever incidence and to improve the quality of life in the four project communes. This dengue control project was based on biological control using Mesocyclops, a larvivorous micro-crustacean, as well as on the establishment of a strong community involvement to educate the population on dengue transmission and to reduce Aedes breeding by removal of containers. During three years, a network of collaborators was responsible for introducing Mesocyclops in all the containers defined as key breeding-sites, and regular activities such as community training workshops, school programmes, clean-up campaigns and health promotion through IEC programmess were performed. To make this programme sustainable, local leadership has been strengthened as well. The use of these larvivorous micro-crustaceans as a biological control strategy against dengue over the medium and long term, when combined with community participation and effective health promotion, demonstrated a significant reduction in dengue vector populations and dengue cases.  In Vietnam, this study reconfirms that there is an ecological alternative to systematic use of insecticides to control dengue vector population. (Abstract word count: 186)Le " Programme Meso-Vietnam " a été mis en œuvre au Vietnam entre octobre 2007 et décembre 2010. Ce programme vise à réduire l'incidence de la dengue et de la fièvre hémorragique de la dengue et à améliorer la qualité de vie dans les quatre communes sélectionnées pour le projet. Ce projet de lutte contre la dengue était basé sur un contrôle biologique assuré par des Mésocyclopes, micro-crustacés larvivores, et sur l'établissement d'une forte implication de la communauté pour éduquer la population sur la transmission de la dengue et pour réduire la reproduction des moustiques Aedes par élimination des conteneurs leur servant de site de ponte. Pendant trois ans, un réseau de collaborateurs a été chargé d'introduire des Mésocyclopes dans tous les conteneurs définis comme des sites de reproduction clés, et des activités régulières telles que des ateliers de formation communautaires, des programmes scolaires, des campagnes de nettoyage et des activités de promotion de la santé via les programmes IEC ont été mises en place. En outre, pour assurer la pérennité de ce programme, le leadership local a été renforcé. L'utilisation de ces micro-crustacés larvivores comme stratégie de contrôle biologique de la dengue à moyen et long terme, associée à une participation communautaire et à une promotion efficace de la santé, a permis d'aboutir à une réduction significative des populations vecteurs de la dengue et des cas de dengue. Au Vietnam, cette étude confirme une fois de plus qu'il existe une alternative écologique à l'utilisation systématique d'insecticides pour lutter contre les vecteurs de la dengue.El “Programa Meso-Vietnam” se implementó en Vietnam desde octubre de 2007 hasta diciembre de 2010 para reducir la incidencia del dengue y la fiebre hemorrágica del dengue y para mejorar la calidad de vida en los cuatro municipios del proyecto. Este proyecto de control del dengue se basaba en el control biológico usando Mesocyclops, un microcrustáceo larvívoro, así como en el establecimiento de una fuerte implicación comunitaria para educar a la población sobre la transmisión del dengue y para reducir la cría de Aedes mediante la eliminación de recipientes. Durante tres años, una red de colaboradores fue responsable de la introducción de Mesocyclops en todos los recipientes definidos como sitios clave para la cría, y se realizaron actividades regulares tales como talleres de formación comunitaria, programas escolares, campañas de limpieza y promoción de la salud a través de programas de IEC. Para hacer sostenible este programa, también se reforzó el liderazgo local. El uso de estos microcrustáceos larvívoros como estrategia de control biológico contra el dengue a medio y largo plazo demostró una reducción significativa de las poblaciones de vectores del dengue y los casos de dengue cuando se combinaba con la participación comunitaria y la promoción eficaz de la salud. En Vietnam, este estudio vuelve a confirmar que existe una alternativa ecológica al uso sistemático de insecticidas para controlar la población de vectores del dengue

Primary and secondary somatic embryogenesis in Jatropha curcas L. From leaf transverse thin cell layers

An efficient method for plant regeneration in Jatropha curcas L. via primary and secondary somatic embryogenesis culture from ex vitro leaves of 6-month-old plants was presented in this study. Leaves were cut into transverse thin cell layers (tTCLs) and cultured on MS medium supplemented with kinetin (KIN) at 0.5, 1.0, 1.5, and 2.0 mg/l in combination with indole-3-butyric acid (IBA) at 0.1, 0.5, and 1.0 mg/l or 2,4-dichlorophenoxyacetic acid (2,4-D) at 1.0, 1.5 and 2.0 mg/l . The highest embryogenic callus formation rate (89.3%) was obtained on medium supplemented with 1.0 mg/l KIN and 1.5 mg/l 2,4-D. The calli were selected for the study of primary somatic embryogenesis on MS medium containing 2,4-D (0.01, 0.03, 0.05, and 0.07 mg/l) or KIN (0.5, 1.0, 1.5, and 2.0 mg/l). The highest primary somatic embryos formation rate (76.67%) was achieved on MS medium supplemented with 1.0 mg/l KIN. The primary embryos were cultured on medium supplemented with KIN (0.1, 0.5, 1.0, 1.5, and 2.0 mg/l) combined with 0.2 mg/l indole-3-butyric acid (IBA) or 0.05 mg/l 2,4-D. The combination of 1.5 mg/l KIN and 0.05 mg/l 2,4-D was suitable for secondary embryos formation. Embryos proliferated rapidly, and the highest number of secondary embryos (77.5 embryos) wasobtained from a single primary embryos inoculated. Results also showed that the addition of proline (0.75 g/l) or spermidine (0.15 mM) to the culture medium increased the number of secondary embryos considerably. The fully developed plantlets exhibiting healthy roots and shoots were obtained when somatic embryos were sub-cultured onto B5 medium containing 1.5 mg/l IBA

Some preliminary results of paleo-tsunami study in the coastal region of the Nghe An province, Vietnam

In the coastal region of the Nghe An province, the geomorphology is characterized by appearances of fields of arca granosa with placura placenta and hills of placura placenta with arca granosa, namely: The hills of placura placenta with the arca granosa shells in the Quynh Van and Nghi Tien communes; the fields of arca granosa with the placura placenta: deep-seated in the Quynh Nghia, Dien Chau and along the Nghi Yen coast  which have age of 4,500 - 4,300 yrs.; The appearance of the placura placenta-arca granosa shell’s fields and hills which do not originate from either marine transgression in the Holocene epoch, tectonic movement or artificiality; Our results suggest that there were three tsunami events occurring in the past during the periods of 4,500 - 4,300; 4,100 - 3,900 and 900 - 600 yrs., respectively in the region

Morphological characterization and classification of cassava (Manihot esculenta Crantz) in Vietnam

The aim of this study was to establish the morphological basis for the classification of major cassava cultivars (Manihot esculenta Crantz) planted in Vietnam. Twenty typical descriptors were observed in various specific growth stages. Four traits related to mature leaves and two traits related to leaf veins were detected in cassava plant after the 4-month stage. At the same time, 12 root- and stem-related descriptors were collected in cassava plants from 8-months to harvest. We found that two traits in the apical leaves can be observed in every growth stage. A classification tree based on these traits was constructed with 6 essential morphological descriptors to recognize the 7 most common cassava cultivars in Vietnam. KM 140 variety is distinguished by purplish-red in apical leaves, while KM 98-7 can be classified with straight or linear shapes of central leaflet. The irregular orientation of the petiole is a unique descriptor of local cultivar XVP. In the case of SM 937-26, weak foliar scars are observed. Finally, KM 94, KM 419, and KM 98-5 varieties can be classified by the color of the stem epidermis. These morphological descriptors will be a foundation to classify all cassava varieties planted in Vietnam.